Precautions For Assembly Of Galvanized Gabion Walls

11:53:27 25/04/2020

The galvanized gabion wall has strict requirements during the binding and assembly. The assembly construction of the galvanized gabion walls directly affects the quality of the project, so it must be serious when tying, then the galvanized gabion wall needs to be bound What do you pay attention to?

Galvanized gabion walls requirements for the position and number of turns of the binding wire: the twisting of the binding wire cannot be less than 3 strands or three turns, the upper and lower bottom corners must be bound, and the four sides of the connection must be bound together;

Requirements for the spacing of galvanized gabion walls: when galvanized gabion walls on the same layer are bound, make sure that the tying place is not more than 25cm away from the next tying place;

Between the cage and the cage, the upper and lower gabion cages and the gabion cages should be bundled. The bundling positions are four channels per meter, and they are evenly distributed. The number of upper and lower connections must not be less than 16;

For the connection of galvanized gabion wall cover, the galvanized gabion walls should be stretched and straightened before tying, and the spacing between the lashing should not be greater than 25cm. If the gap between the gabion wall mesh cover and the gabion wall cage is relatively large, we should Use cross wire to bind and tighten to prevent the stone from protruding from the galvanized gabion walls.