What Are The Quality Inspection Items Of The Gabion Walls?

11:42:02 25/04/2020

Strict quality testing of a product before leaving the factory is very important for the product. If a quality problem is detected during the quality testing process, it is absolutely not allowed to enter the market.

Before going out of the factory, the gabion walls also undergo strict quality inspection. Today, let ’s take a look at the quality inspection projects of the gabion walls:

1. Test the tensile strength of the gabion wall metal wire, the drawing function is not good, and cracking may occur during use. The tensile strength of the general high-quality gabion wall metal wire is higher than 515mpa, only this Within the scope, the gabion wall mesh will not crack, so as to ensure the normal use of the goods.

2. Check whether the galvanizing process of the gabion wall mesh is qualified. The galvanization degree of the gabion wall mesh is closely related to the corrosion resistance of the product, and even directly contacts the service life of the product. If it is not qualified, the first thing is to see whether the thickness of the galvanized layer and the galvanized layer are uniform.

3. At the end, check whether the production technology of the gabion walls is qualified. In this test project, we mainly check some of the welding points of the mesh, whether the welding is strong, if the welding is not strong, it is easy to be damaged by the impact of external force .

The above are the main testing items before the gabion walls leave the factory. Only after passing these tests can we prove that the quality of the product can meet the requirements for use and then put it into use.